There is a local version available of this page. Change to the local version?
United States

TOCADERO ONE

Automatic Total Organic Carbon Analyzer (On-line TOC analyzer)

HORIBA's on-line water quality monitor

As part of HORIBA's on-line water quality analyzer lineup dedicated to safeguarding global water quality through analytical technology, a precise and reliable total organic carbon analyzer has been developed.
On-line water quality monitoring contributes to the efficiency improvement of wastewater management.
To meet a wide range of measurement needs and the demands of challenging environments, our system is equipped with highly scalable hardware and user-friendly software.

TOC

*

*Optional features

Division: Water Pollution
Manufacturing Company: HORIBA Tocadero GmbH

1200°C combustion oxidation method

- No catalyst required
- Capable of handling high-concentration samples ranging from 0 to 20000 mg/L C with its high oxidative decomposition power.
(However, it may vary depending on the measurement environment and sample characteristics.)
- Compatible with a wide range of applications.
- Less prone to furnace blockage even with high concentration and high salinity samples.

Achieves high-speed processing

Total Carbon (TC): Minimum 1 minute, Non-Purgeable Organic Carbon (NPOC): Minimum 3 minutes
*May be affected by installation conditions, sample water conditions, and settings.

Continuous and stable measurements can be achieved

Through monitoring device status with each sensor, we are approaching Condition Based Maintenance (CBM).
*May be affected by installation conditions, sample water conditions, and settings.

Reduction of residue effects

Incorporating functions to reduce residue effects and an automatic cleaning feature using pure water, allow the system to respond effectively during flow path switching or concentration fluctuations.
*May be affected by installation conditions, sample water conditions, and settings.

ANALYTICAL PERFORMANCE

Measurement ranges0-1 ppm, 0–1 00 ppm, 0–1 .000 ppm, 0–1 0.000 ppm (optional: 0–1 00.000 ppm)
Limit of detection0,1 ppm
Cycle time TOC(NPOC) < 3 min.
Cycle time TC/TOC 1 min.
Repeatability± 2 % end-of-range
TDSup to 200 g/l (20% NaCl)
Particles< 2.000 microns (optional: homogenizer and sample preparation)
scrollable

 

PHYSICAL PROPERTIES

Weight< 55 kg
Dimensions800 H × 600 W × 320 D mm
PowerAC 110 – 230V ±10V, 50/60 Hz, Approx. 600 VA
Carrier gasCO2 free instrument air
scrollable

 

ENVIRONMENTAL CONDITIONS

Indoors2 – 45 °C
Relative humidity< 85 % (no condensation)
HousingIP 54, IP 65 (optional: NEMA4X)
Ex p-EnclosureZone 1/2, T3 and T4, ATEX & IECEx
scrollable

 

COMMUNICATION

Display7“ Touch Panel
Supported protocolsOPC UA, Ethernet, Profinet,Modbus
CommunicationBluetooth, WLAN, GSM, 5G
Relays4 programmable - NAMUR standard
LanguagesGerman, English, Japanese, Chinese, Korean
scrollable

Request for Information

Do you have any questions or requests? Use this form to contact our specialists.

* These fields are mandatory.

Related products

HT-110
HT-110

On-line TOC analyzer

0040N-10D
0040N-10D

ISFET pH Electrode

514-05
514-05

0.5% NaCl Standard Solution

514-22
514-22

1.41 mS/cm Conductivity Standard Solution

514-23
514-23

12.9 mS/cm Conductivity Standard Solution

514-50
514-50

5.0% NaCl Standard Solution

6069N-10C
6069N-10C

For Very Slender Test Tubes

6252-10D
6252-10D

For Food Samples

6261-10C
6261-10C

For Flat Surface Measurement

6367N-10D
6367N-10D

For High Accuracy pH Measurement

9415-10C Standard ToupH electrode
9415-10C Standard ToupH electrode

For General Laboratory Application

9418-10C Micro ToupH electrode
9418-10C Micro ToupH electrode

For Low-Volume Samples

9425-10C
9425-10C

For General Purpose Use

9480-10C Long ToupH Electrode
9480-10C Long ToupH Electrode

For Large Containers and Long Test Tubes

9481-10C Sleeve ToupH Electrode
9481-10C Sleeve ToupH Electrode

For Viscous and Non-Aqueous Samples

9615S-10D Standard ToupH Electrode
9615S-10D Standard ToupH Electrode

Electrode for General Laboratory Application

9618N-10D Micro ToupH Electrode
9618N-10D Micro ToupH Electrode

Electrode for Low-Volume Samples

9625-10D
9625-10D

For General Purpose Use

9630-10D
9630-10D

For Low Conductivity Samples

9631-10D
9631-10D

For Hydrofluoric Acid or HF Samples

9632-10D
9632-10D

For Strong Alkali Samples

9652-10D
9652-10D

For Field Testing

9680S-10D Long ToupH Electrode
9680S-10D Long ToupH Electrode

For Large Containers and Long Tubes

9681S-10D Sleeve ToupH Electrode
9681S-10D Sleeve ToupH Electrode

For Vviscous and Non-Aqueous Samples

Show More

Corporate