Multi-Component Gas Analyzer - VA-5000 Series - HORIBA
There is a local version available of this page. Change to the local version?
United States

VA-5000 / VA-5000WM Series

Multi-Component Gas Analyzer VA-5000 Series

多組氣體分析儀

多組氣體分析儀 VA-5000 系列是一款全方位氣體分析儀,可滿足環境監測、能源開發支援、品質控制以及連續排放監測系統 (CEMS) 的測量需求。 VA-5000 系列氣體分析儀在一個機殼內最多可配置 4 個偵測器模組。具有多種範圍選擇的感測器模組的多種組合使得該系列分析儀能夠用於各種應用。

多組分氣體分析儀有 19 吋面板安裝型 (VA-5000) 和壁掛式分析儀 (VA-5000WM),可安裝在有限的安裝空間內。

可選的 VS-5000 樣氣調節系統旨在透過提供最佳的測量樣品條件來支援 VA-5000 分析儀。

產品分類: Process Gas
製造商: HORIBA, Ltd.

產品特點

適合各種應用的多功能性 同時測量多達四種氣體成分:

CO:一氧化碳

CO2:二氧化碳

CH4:甲烷

N2O:一氧化二氮

NO:一氧化氮

SO2:二氧化硫

NH3:氨

NOx:一氧化氮和二氧化氮

O2:氧氣 矽氧烷

自動壓力補償透過補償氣壓變化提供穩定的測量

採用恆溫控制氣體流量感測器來提高測量精度。

使用方便

  • 5.7 吋 LCD 觸控螢幕提供分析儀資訊、測量狀態、趨勢圖、診斷和分析儀設置
  • 探測器模組可以快速添加或更換
  • 除了樣本資料之外,前面板 USB 還允許記錄儀器即時設置

          

附加功能

  • 自動校準

  • 自我診斷

  • 數據記錄

  • 分析儀配置設定

  • 多個類比和數位輸出(選項)

VA-5000 系列樣氣調節系統

  • 旨在支援 VA-5000 系列分析儀

  • 方便的 19 吋機架安裝配置

  • 將幫浦、冷卻器、過濾器、流量控制、NOx 轉換器整合在一個外殼內

相關產業

相關應用

Specifications of the VA-5000 / VA-5000WM Multi-Component Gas Analyzer

Measurement principleNDIRCLAMagnetopneumaticGalvanic cellZirconiaParamagnetic
PerformanceLinearityStandard±1.0% F.S.
Option±2.0% F.S.(range ratio 1:20)-----
Response time30 sec or less (T90), 40 sec or less (Td+T90); single component*145 sec (Td+T90)
Warm-up time60 min (90 min for SO2)60 min60 min40 min20 min120 min
Flow rateStandard0.5L/min0.3L/min0.5L/min0.5L/min0.5L/min0.5L/min
Option1.0L/min*2----1.0L/min*2
CommunicationEthernet (ModbusTM/TCP)
Data storageOptionUSB memory
Input/Output (option)AnalogInputMaximum 4ch, 0-16 mA / 4-20 mA / 0-20 mA or 0-1 V isolated
OutputMaximum 8ch, 0-16 mA / 4-20 mA / 0-20 mA or 0-1 V isolated, Current output: load resistance < 750Ω, Voltage output: input impedance > 100k Ω
DigitalInputMaximum 16ch isolated, Open voltage: 24 V, Short-circuit current 10mA
Maximum load resistance < 50 Ω, Minimum pulse width: 0.5 sec
OutputMaximum 16ch isolated, Maximum voltage DC 30 V, Maximum current 1A
Minimum voltage DC 0.1 V, Minimum current 0.1 mA
Sample conditionAmbient temperature, dust free, H2O less than 5°C saturation, Pressure 0 to 490 Pa
Other: Shall contain no corrosive gas, combustible gas, and explosive gas.
Gas connectionsInlet and outlet - 6 mm/4 mm PTFE: a single gas inlet is provided standard; the gas flows sequentially from one module to the next; as an option separate gas inlets can be provided for each module
Gas tubingPTFE; stainless steel optional
JointSample Inlet: Rc 1/8(φ6/φ4mm PTFE joint), Exhaust: φ6/φ4mm PTFE joint
Air Inlet: Rc 1/8(φ6/φ4mm PTFE joint); installed CLA. CLA: Exhaust: φ6/φ4mm PTFE joint; installed CLA,
MPA Outlet: φ6/φ4mm PTFE joint; installed MPA, Zero gas Outlet: φ6/φ4mm PTFE joint; installed MPA
InstallationTemperature 0-45°C, Humidity 90% (No condensation), Altitude Max 3000m (combination with only NDIR), (combination with Zirconia, Galvani, MPA, and CLA: max 2000m), No fluctuation of backpressure
Protection degreeEquivalent to IP20
Power100-240 V AC (±10%, maximum voltage 250 VAC), 50/60 Hz (±1.0%), Consumption: 100 to 350 VA
Display5.7-inch touch screen
CaseVA-5000: 19-inch panel mount / VA-5000WM: Mounted on wall
Exterior dimensionsVA-5000: 430 (W) × 380 (D) × 132 (H) mm / Approx. 17 (W) × 15 (D) × 5.2 (H) in
Deozonator unit for CLA: 111 (W) × 95 (D) × 100 (H) mm / Approx. 4.4 (W) × 3.7 (D) × 3.9 (H) in *protrusions excluded
VA-5000WM: 424 (W) × 206 (D) × 484 (H) mm / Approx. 17 (W) x 8 (D) x 19 (H) in *protrusions excluded
MassVA-5000: 7-18kg, Approx. 15-40lb / VA-5000WM: 14-24kg, Approx. 31-53lb
scrollable

*1 When single component: flow rate is 0.5L/min (CLA: 0.3L/min)
*2 Available when all components are NDIR and PMA

See full Specifications including Dimensional Outlines of VA-5000/WM Analyzer and VS-5000 Sampling Unit (PDF)

 

Specifications of the VS-5000 Sampling Unit

ModelVS-5001VS-5002VS-5003VS-5004
Applicable principlesNDIR, Zirconia, Galvanic cell, PMANDIR, Zirconia, Galvanic cell, MPA, PMANDIR, Zirconia, Galvanic cell, CLA, PMANDIR、Zircoia, Galvanic cell, MPA, CLA, PMA
Form19 inch panel mount
Sampling method5°C dry sampling
MaterialsSUS, PP, PVC, PVDF, PTFE, FKM, CR, Glass
Flow rate1.5~5.0 L/min
Sample supply0.5 L/min x 2 systems*10.3L/min x 1system
Power100~240 V AC (±10%, maximum voltage 250V AC), 50/60 Hz (±1%)
Power consumption150 VA200 VA
JointSample inlet: φ8/φ6 mm PTFE joint, Sample outlet: φ6/φ4 mm PTFE joint
Air outlet: φ6/φ4 mm PTFE joint, MPA inlet: φ6/φ4 mm PTFE joint
Regulator: φ6/φ4 mm PTFE joint, Calibration inlet: RC1/8(φ6/φ4mm PTFE joint)
Bypass outlet/Exhaust/Drain outlet: φ8mm hose end
Sample gasAmbient temperature, Dust: less than 0.1mg/m3, H2O: less than 60°C saturation with drain pot (Approx. 25% H2O), Pressure: ±980 Pa, SO3: less than 50ppm, NO2: less than 6ppm*2 , (Corrosive gas, flammable gas and explosive gas are not included)
Dimension430 (W) x 550 (D) x 221 (H) mm / Approx. 17 (W) x 22 (D) x 8.7 (H) in (protrusions excluded)
Mass14kg / 31lb16kg / 35lb19kg / 42lb20kg / 44lb
scrollable

*1 Environmental temperature needs to be less than 35°C. If it's over 35°C, please consult HORIBA.
*2 When the sample gas includes more than 6ppm NO2, it needs to use optional NOX converter.

See full Specifications including Dimensional Outlines of VA-5000/WM Analyzer and VS-5000 Sampling Unit (PDF)

Gas Monitoring Power Plant
Gas Monitoring Power Plant
Real-Time Gas Measurement in Fuel Cells for Household and Commercial Use
Real-Time Gas Measurement in Fuel Cells for Household and Commercial Use
Real-time Measurement of Generated Gas from Safety Testing of Rechargeable Batteries
Real-time Measurement of Generated Gas from Safety Testing of Rechargeable Batteries
Nitrous Oxide Monitoring for Greenhouse Gas Reduction
Nitrous Oxide Monitoring for Greenhouse Gas Reduction
Quality Control in Medical Oxygen Gas Production and Verification
Quality Control in Medical Oxygen Gas Production and Verification
Continuous Monitoring of Sulfide Off-Flavors in Beverage Production
Continuous Monitoring of Sulfide Off-Flavors in Beverage Production

展開

留言諮詢

如您有任何疑問,请在此留下詳細需求或問題,我們將竭誠您服務。

* 這些欄位為必填項目。

Related products

FTX-ONE-CL
FTX-ONE-CL

FTIR Exhaust Gas Analyzer Dilute Measurement Type

FTX-ONE-CS/RS
FTX-ONE-CS/RS

FTIR Exhaust Gas Analyzer Direct Measurement Type

IR-300
IR-300

Vapor Concentration Monitor

IR-400
IR-400

High-grade type Gas Monitor for Chamber Cleaning End Point Monitoring

MEXA-1170HCLD
MEXA-1170HCLD

Heated Type NOx Analyzer

MEXA-1170HFID
MEXA-1170HFID

Heated Type THC Analyzer

MEXA-1170SX
MEXA-1170SX

Motor Exhaust Gas Sulfur Analyzer

MEXA-1300R
MEXA-1300R

Motor Exhaust Gas Analyzer

MEXA-584L
MEXA-584L

Automotive Emission Analyzer

MEXA-ONE
MEXA-ONE

Motor Exhaust Gas Analyzer

MEXA-ONE-FT
MEXA-ONE-FT

FTIR Motor Exhaust Gas Analyzer

MEXA-ONE-QL-NX
MEXA-ONE-QL-NX

Laser Spectroscopic Motor Exhaust Gas Analyzer

OBS-ONE GS Unit
OBS-ONE GS Unit

On-board Emissions Measurement System

OBS-ONE-XL (IRLAM)
OBS-ONE-XL (IRLAM)

On-board NH3/N2O Measurement System for real-world driving

展開

AP-380 Series
AP-380 Series

Air Quality Monitor

BE-150
BE-150

OEM gas (CO/HC) analyzer

BE-220FSD
BE-220FSD

OEM gas (NO) analyzer

EMGA-921
EMGA-921

Hydrogen Analyzer

EMGA-Expert
EMGA-Expert

Oxygen/Nitrogen/Hydrogen Analyzer
(Flagship High-Accuracy Model)

EMGA-Pro
EMGA-Pro

Oxygen/Nitrogen Analyzer (Entry Model)

EMIA-Expert
EMIA-Expert

Carbon/Sulfur Analyzer
(Flagship High-Accuracy Model)

EMIA-Pro
EMIA-Pro

Carbon/Sulfur Analyzer (Entry Model)

EMIA-Step
EMIA-Step

Carbon/Sulfur Analyzer (Tubular Electric Resistance Heating Furnace Model)

ENDA-7000 Series
ENDA-7000 Series

Stack Gas Analyzer

IR-300
IR-300

Vapor Concentration Monitor

IR-400
IR-400

High-grade type Gas Monitor for Chamber Cleaning End Point Monitoring

MEXA-1300R
MEXA-1300R

Motor Exhaust Gas Analyzer

MEXA-584L
MEXA-584L

Automotive Emission Analyzer

MEXA-ONE
MEXA-ONE

Motor Exhaust Gas Analyzer

OBS-ONE GS Unit
OBS-ONE GS Unit

On-board Emissions Measurement System

OBS-ONE-XL (IRLAM)
OBS-ONE-XL (IRLAM)

On-board NH3/N2O Measurement System for real-world driving

TCA-5000
TCA-5000

Hydrogen Gas Analyzer

展開