Time-Resolved Electroluminescence with Fluorolog-QM
The Fluorolog-QM’s advanced modularity supports the characterization of electroluminescent materials across a broad time range, from nanoseconds to seconds, without the need for external devices.
The following specifications are for the standard Fluorolog-QM-75-22 system.
Options and upgrades may be available upon request.
| Signal-to-Noise Ratio | (>35,000:1 FSD) |
| Data Acquisition Rate | 1,000,000 points/sec. to 1 point/1000 sec. |
| Inputs | 4 photon counting (TTL); 4 analog (+/- 10 volts); 1 analog reference channel (+/- 10 volts); 2 TTL |
| Outputs | 2 analog (+/- 10 volts); 2 TTL |
| Emission Range with standard PMT | 185 nm to 900 nm (optional to 5,500 nm) |
| Light Source | High efficiency “ECO” friendly continuous 75 W Xenon arc lamp (Optional 450 W Xenon) |
| Excitation and Emission Monochromators | 700 mm, triple grating, coma-aberration corrected, asymmetrical, excitation or emission optimized, Czerny-Turner design with computer controlled slits at entrance, intermediate plane and exit. |
| Slits | Computer controlled, continuously adjustable |
| Excitation Grating | 1200 line/mm 300 nm blaze, (Up to two optional gratings can be ordered) |
| Emission Grating | 1200 line/mm 400 nm blaze, (Up to two optional gratings can be ordered) |
| Wavelength Accuracy | +/- 0.3 nm |
| Minimum Step Size | 0.01 nm (grating dependent) |
| Standard Detection | Multimode, -20 degrees Celsius cooled, 1600 Volt PMT housing; Multimode: Photon Counting, 3 analog (fast, medium, slow response), direct and Single-Shot Transient Digitizer (SSTD) mode, and Time-Correlated Single Photon Counting (TCSPC), R928P PMT standard (other PMT's available) |
| R928P PMT Dark Count: | 10 counts per second or less |
| R928P PMT Maximum Linear Count Rate: | 10,000,000 counts per second |
| System Control | Computer interface with FelixFL spectroscopy software |
| Lifetime Range | 5 ps to seconds with appropriate time-resolved accessories |
HORIBA Scientific has a policy of continuous product development, and reserves the right to amend part numbers,
descriptions and specifications without prior notice.
