| Model | MEXA-1300R |
| Compatible standards | CE, FCC (Class A) |
| Reference standard | OIML R99 Class 0 |
| Analyzing target | Exhaust gases of two-cycle and four-cycle engines |
| Measurement item and range | CO : 0.00% vol - 10.00% vol HC : 0ppm vol - 10,000ppm vol (N-hexane) CO2 : 0.00% vol - 20.00% vol AFR : 10.0 - 30.0 Lambda : 0.500 - 2.500 O2 : 0.00% vol - 25.00% vol (Optional) |
| Principle / Calculation method | CO, CO2, HC : NDIR (Non-dispersive infrared gas analysis) O2 : galvanic cell type sensor AFR, Lambda : carbon balance method or Bretschneider method (When O2 sensor is embedded) |
| Operating environment | Temperature : 5 °C - 35 °C Humidity : 85% RH or less (No condensation) Atmospheric pressure : 86 kPa - 106 kPa |
| Configuration | Main body (Analysis unit, control unit, display integrated in main body) |
| Communication interface | HOST (RS-232C) : D-sub 9 pin (Male) HOST (LAN) : RJ-45 Analog output : D-sub 9 pin (Female) 0 - 1 V 6 ch（Optional） |
| Power supply | Any of the following voltage and frequency (To be specified when ordering) 100±10 V AC, 50 / 60 Hz±1 Hz, single phase 110±11 V AC, 50 / 60 Hz±1 Hz, single phase 115±11.5 V AC, 50 / 60 Hz±1 Hz, single phase 120±12 V AC, 60 Hz±1 Hz, single phase 200±20 V AC, 50 / 60 Hz±1 Hz, single phase 220±22 V AC, 50 Hz±1 Hz, single phase 230（207 - 250）V AC, 50 Hz±1 Hz, single phase 240（216 - 250）V AC, 50 Hz±1 Hz, single phase |
| Power consumption | Approx. 250 VA (100 V AC - 240 V AC) |
| Dimensinons | Approx. 430 (W) x 400 (D) x 900 (H) mm |
| Mass | Approx. 60 kg |
MEXA-1300R
Motor Exhaust Gas Analyzer
MEXA-1300R is a motor exhaust gas analyzing system for two and four stroke engine assembly lines and has an integrated sample handling system for removal of oil and moisture. The measurement of CO, CO2, HC and O2 (optional) in exhaust gases is made simply by inserting the sample probe into the tail pipe. AFR and Lambda are also calculated from the exhaust gas concentrations.
Calendar Timer Function
The start time and end time of the instrument can be set for each day of the week. A warm up sequence and a purge are carried out automatically.
Self-Diagnosis Function
Instrument parameters such as sample flow rate and temperature of the electronic cooler are monitored to ensure highly accurate and reliable measurements.
Measurement Value Judgment Function
Using AUTO mode, measurement, judgment and then purge are made continuously.
Small Footprint
11% smaller than previous model. Good design allows it to fit into any workspace.
