There is a local version available of this page. Change to the local version?

United States

EMIA-Pro

Carbon/Sulfur Analyzer (Entry Model)

Your high-precision solution for diverse samples and increased productivity

The EMIA-Pro Carbon/Sulfur Analyzer provides exceptional accuracy, streamlined maintenance and user-friendly software enhancements that enable efficient measurements. Its reduced cycle time also helps to accelerate development and manufacturing speed.

Typical Applications:
- Energy: Materials for lithium-ion battery, fuel cell, electrolyzer
- Electric parts
- Ceramics
- Semiconductor: Silicon, poly-silicon, GaN
- Steel and non-ferrous alloy (metallurgy): Iron, copper, nickel, aluminum, zinc, tungsten carbide
- Mineral: Cokes, lime stone, coal, silicone, rare-metal
- Others: Catalyst, rubber, carbon black, silica, cement

* For even higher measurement accuracy and lower detection limit, we also offer the EMIA-Expert Carbon/Sulfur Analyzer (Flagship High-Accuracy Model).

Segment: Scientific

Division: Carbon/Sulfur & Oxygen/Nitrogen/Hydrogen Analyzers

Manufacturing Company: HORIBA, Ltd.

Greater Accuracy

Proven NDIR Gas Detection Technology

The EMIA-Pro Carbon/Sulfur Analyzer utilizes the infrared method to measure the carbon and sulfur content of a sample after combustion in an induction furnace. It leverages HORIBA's reliable Non-Dispersive Infrared (NDIR) measurement technology, providing a measurement range optimized for carbon from 1.6 ppm to 6.0% and for sulfur from 2 ppm to 1.0%. The analyzer features a unique CO detector and can be utilized for a wide range of inorganic materials, including steel, cokes, catalysts, non-ferrous alloys like aluminum, and lithium-ion battery materials.

Please also refer the Measurement Principle page for the details.

Flexible Upgrade after Installation

Customer has the option to expand the functionality of the EMIA-Pro system at any time, even after installation, depending on their specific needs:

Purifier Unit for carrier gas (for C Analysis) - Enables measurement of ultra-low carbon concentration with high accuracy by eliminating hydrocarbon impurities in the carrier gas.
Auto Sampler Unit - Able to accommodate up to 20 positions.
Halogen Trap Unit - Helps remove halogen elements in the sample to prevent damage to the device.

Improved Measurement and Maintenance Efficiency

Substantial Reduction in Maintenance

Along with the EMIA-Pro's cleaning feature, HORIBA has developed a robust design with fewer components for more reliable use and less service requirements.

The latest innovations have enabled the cleaning time for the EMIA Series to be typically half that of our conventional models (patent applied for*). Additionally, the structure around the combustion area has been designed to be as simple as possible, allowing for quick and intuitive maintenance. Specialized skills or knowledge are not required for maintenance work.

^{Flat design around the crucible stand}

The cleaning efficiency of the EMIA Series instruments has been significantly improved compared to our conventional Carbon/Sulfur analyzers with the use of a unique automatic cleaning mechanism (patent applied for*). This allows users to repeat measurements up to 200 times**, with reduced time required for maintenance and cleaning, without sacrificing measurement accuracy.

* JP6063582, US10379017, EP3064938, ZL201480058824.2, IN351227, JP6605807, US9778148, EP3037814 and ZL201510971175.1
** Number of repeatable measurements may vary depending on the sample and measurement conditions.

^{Before measurement After 200 measurements}

Video Player is loading.

Current Time 0:00

Duration 0:00

Loaded: 0%

Stream Type LIVE

Remaining Time 0:00

High Throughput

The EMIA Series can complete one measurement cycle, measurement-display result-cleaning, in 70 seconds (i.e. about 50 samples/hour).

More Intuitive Software for Easy Operation

Advanced Operation Software

The EMIA Series features its own proprietary operating software, which has been designed with a focus on ease of use, optimizing layout, operating menus, and functions for enhanced user-friendliness.

Enhanced Operator Assistance

Additionally, the software includes a self-diagnostic monitoring feature to assess the status of connected devices, an alarm function, and three navigators to recommend the most suitable conditions for samples, troubleshoot errors, and alert users to perform maintenance. These features improve daily operation and ensure efficient analysis.

Video Player is loading.

Current Time 0:00

Duration 0:00

Loaded: 0%

Stream Type LIVE

Remaining Time 0:00

Contents		EMIA-Pro
Required sample amount		1g ± 0.1g
Typical Meas. time		70 seconds/cycle
Carbon	Meas. Range (m/m)	1.6 ppm - 6.0%
Carbon	Blank accuracy	σ_n-1≦ 0.8 ppm
Sulfur	Meas. Range (m/m)	2.0 ppm - 1.0%
Sulfur	Blank accuracy	σ_n-1≦ 1.0 ppm
Sample meas. Accuracy	Carbon	σ_n-1 ≦ 2.0 ppm or RSD≦1.0%
Sample meas. Accuracy	Sulfur	σ_n-1 ≦ 2.0 ppm or RSD≦1.5%
Utility	Carrier gas	Oxygen (Purity; 99.5%, Pressure; 0.30-0.33MPa)
	Operation gas	Nitrogen (Purity; 99.5%, Pressure; 0.35-0.38MPa)
	Power	200/220/240V, 50/60Hz, 5kVA
Dimensions	Main unit*	500(W) x 725(D) x 710(H) mm
Mass	Main unit	approximately 134 kg
Data processing and operation		USB data communication with PC Windows 8.1 Touch panel or Key board and mouse operation
Model name		EMIA-20P: Carbon/Sulfur EMIA-21P: Carbon EMIA-22P: Sulfur

scrollable

Note) "ppm" is equal to mg/kg.

*Except piping parts, projection parts (D:79mm) and flow meter on the back side.

Schematics

Accessories

Crucible Pre-heating Unit

The crucible pre-heating unit; FK-100 with automatic transportation function to heat a ceramic cruible at 1100 degree in 10min. before analysis.

Autosampler

Automation crucible loading and disposing unit. Up to 20 pcs of crucible are available to be set. Click here for more information of automation options.

Consumables

Ceramic crucible

Low carbon blank and high dimension tolerance for high precision analysis.

Accelerators

High-purity materials which support stable analysis: Tungsten(W), Tin(Sn), Copper(Cu), Iron(Fe)

Measurement of Oxygen Deficiency in Lithium Manganate

Spinel-type lithium manganate (LiMn2O4-σ) is said to change its discharge characteristics due to slight differences in composition caused by oxygen deficiency. The differences in the discharge characteristics of lithium manganate batteries are also observed in the particle size and crystal structure, but attention is also paid to the difference in the oxygen bonding ratio, as samples with less oxygen bonding have poorer discharge characteristics.

Analysis of carbon and sulfur in catalysts in oil refining

Refineries are equipped with desulfurization units to remove sulfur from oil. The changes in Carbon and sulfur content in catalysts before and after the usage is very important to determine the efficiency and performance of developed catalyst. Therefore, a reliable quantitative analysis of carbon and sulfur is important.

Oxygen, Nitrogen, and Carbon Analysis in Nuclear Fuels

From the perspective of ensuring energy security and reducing CO2 emissions, the use of nuclear energy is attracting worldwide attention. A joint declaration was also released by 25 countries setting forth a cooperation policy toward the ambitious goal of tripling the world's nuclear power generation capacity by 2050 compared to 2020 levels. The safety of nuclear fuel as well as the improvement of fuel performance is extremely important, and the content of oxygen, nitrogen, and carbon must be strictly controlled in nuclear material performance.

Analysis of ultra-trace amounts of sulfur in metal

As the steel materials are becoming more sophisticated, such as natural gas or crude oil pipeline, sulfur content is recommended below 0.5 ppm. Hence, more accurate ultra-trace amount sulfur analysis is required. Analysis of trace amount of sulfur in steel materials can be done quickly with the conventional combustion-infrared absorption method, but the problem is that the sensitivity of the detector is insufficient and it can not be measured.

Purity Analysis in Precious Metal Recycling

While precious metals such as Au, Ag, Pt, and Pd are finite materials, they are essential for electronic components and functional materials. Therefore, it is important to separate and extract the necessary precious metals from the final products and recycle them as high-purity precious metals in order to secure resources and reduce costs. Impurities, which must be controlled, include light elements such as carbon, sulfur, oxygen, and nitrogen. For example, Au (gold) used in electronic devices must be at least 99.999% pure.

Quantitative analysis of carbon contained in bone substitute material

Can we accurately and quickly measure the amount of carbon contained in the material?

Quantitative analysis of carbon and sulfur in tires

To accurately and quickly measure the amount of carbon and sulfur contained in the material.

Measurement of Carbon and Sulfur in Cement

This application note describes the method and conditions to use with the EMIA 820V C/S analyzer to measure cement.

Measurement of Sulfur in Rubber

Sulfer is added in the natural rubber to produce plastic materials. However, it is important to measure the sulfer contained in the rubber to define the chemical and mechanical properties of the final product.

Measurement of Carbon in Ferrosilicon

Ferrosilicon is added as a deoxidant and as an alloying element to steel, that require a special low carbon content. The Low Carbon in Ferrosilicon decreases the electrical conductivity and magnetostriction of electrical steels.

Quality Assurance for the Analysis of Steel by Gas Component Analysis

Sample Preparation and Sampling Methods for the Gas Analysis of Steel

Measurement of Carbon and Sulfur in Copper

Copper in reddish metal, it is malleable, ductile and an extremely good conductor of both heat and electricity. Copper metal is widely used for electrical wiring, water piping, and corrosion resistant parts, either pure or in alloy such as brass and bronze. Carbon and Sulfur are considered as impurities, so it is important to measure and check the Copper purity.

Measurement of Carbon and Sulfur in Titanium Oxide

Titanium oxide are used primarily in the production of paints and plastics and are also used in paper, priniting inks, cosmetics, textiles and food stuffs.

Carbon Analysis: Organic and Inorganic Carbon in Soils

The aim of this application note is to explain the determination of organic and inorganic carbon in soils and how to prepare samples to eliminate inorganic carbon (carbonates) in these soils.

EMIA Series catalog

Auto Sampler Options for the EMIA/EMGA Elemental Analyzers

Request for Information

Do you have any questions or requests? Use this form to contact our specialists.

First name

Last name *

Company or Institution *

Postal code *

City

Country/Region *

State

Email address *

Phone

HORIBA Department

Your message *

I have read and agree to the HORIBA privacy notice

* These fields are mandatory.

Related products

EMGA-921

Hydrogen Analyzer

EMGA-Expert

Oxygen/Nitrogen/Hydrogen Analyzer
(Flagship High-Accuracy Model)

EMGA-Pro

Oxygen/Nitrogen Analyzer (Entry Model)

EMIA-Expert

Carbon/Sulfur Analyzer
(Flagship High-Accuracy Model)

EMIA-Step

Carbon/Sulfur Analyzer (Tubular Electric Resistance Heating Furnace Model)

LabRAM Odyssey

Confocal Raman & High-Resolution Spectrometer

LabRAM Soleil

Raman Spectroscope - Automated Imaging Microscope

SLFA-60

X-ray Fluorescence Sulfur-in-Oil Analyzer

SLFA-6000

X-ray Fluorescence Sulfur-in-Oil Analyzer

XploRA™ PLUS

MicroRaman Spectrometer - Confocal Raman Microscope

XPLORER-NS*

Total Nitrogen and Sulfur Analyzer

XPLORER-TX/TS*

Total Halogen and Sulfur Analyzer

EMIA-Expert

Carbon/Sulfur Analyzer
(Flagship High-Accuracy Model)

EMIA-Step

Carbon/Sulfur Analyzer (Tubular Electric Resistance Heating Furnace Model)

SLFA-20

X-ray Fluorescence Sulfur-in-Oil Analyzer

51 series

Explosion-proof Gas Analyzer

AP-370 Series

Air Pollution Monitor

AP-380 Series

Air Quality Monitor

APCA-370

Ambient Carbon Dioxide Monitor

APMA-370

Ambient Carbon Monoxide Monitor

BE-150

OEM gas (CO/HC) analyzer

BE-220FSD

OEM gas (NO) analyzer

CEMS

Continuous Emission Monitoring System

EMGA-921

Hydrogen Analyzer

EMGA-Expert

Oxygen/Nitrogen/Hydrogen Analyzer
(Flagship High-Accuracy Model)

EMGA-Pro

Oxygen/Nitrogen Analyzer (Entry Model)

EMIA-Expert

Carbon/Sulfur Analyzer
(Flagship High-Accuracy Model)

EMIA-Step

Carbon/Sulfur Analyzer (Tubular Electric Resistance Heating Furnace Model)

ENDA-5000 series

ENDA-5000 series

Stack Gas Analysis System

ENDA-7000 Series

ENDA-7000 Series

Stack Gas Analyzer

GA-370

Trace Gas Monitor

GI-700 series

Stack Gas Analyzer

IR-300

Vapor Concentration Monitor

IR-400

High-grade type Gas Monitor for Chamber Cleaning End Point Monitoring

LO-300

Laser scanning oil film detector

MEXA-1300R

Motor Exhaust Gas Analyzer

MEXA-584L

Automotive Emission Analyzer

OBS-ONE GS Unit

OBS-ONE GS Unit

On-board Emissions Measurement System

OBS-ONE-XL (IRLAM)

OBS-ONE-XL (IRLAM)

On-board NH₃/N₂O Measurement System for real-world driving

OCMA-500

Oil content analyzer

OCMA-550

Oil content analyzer

PG-300 series

Portable Gas Analyzer

TCA-5000

Hydrogen Gas Analyzer

TX-100

Tunable Laser Gas Analyzer

VA-5000 / VA-5000WM Series

VA-5000 / VA-5000WM Series

Multi-Component Gas Analyzer