PC Requirements
- 2.4GHz Processor
- 512Mb RAM
- 2x40Gb HDD
- Zip250 and CD-RW
- 21" Monitor
- Sublimation Printer for quality printing 5:1 to 1:1 (for Imaging)
- Inkjet Printer (for AFIS)
- Scanner
- UPS
A. IMAQUEST Software (8bits to 12bits images handling)
- Software features FFT Cutting of periodic backgrounds and Boosting of ridge periodic pattern, Random Fluorescent background removal, Multiple Filters (Gauss, Sharpen, Lowpass, Equalise.), convert to grey scale, handling of 8bits and 12bits images.
- WSQ Forensic Compression Module is integrated in ImaQuest (FBI 12:1 certified compression, user adjusted other compression rates available) for storage/backup and compressed images email transfer (WSQ includes small and large preview of images and converts TIFF, BMP to/from WSQ images).
- Integrated Driver for Digital Camera to control CCD parameters within the enhancement Software.
B. PRINTQUEST AFIS & APIS Software
Fully featured with all Fingerprint & Palmprint ID capabilities, but Database Licence Limited to 5,000 People/Cards.
Resolution
- 1250 x 1000.
- 12bits = 4,096 LEVELS of Contrast (allowing strong and weak fingerprint areas to be captured without saturation or loss effect).
- Spectral range 280-1000nm (UV-VIS-NIR).
- Binning 1 x 1 or 2 x 2 for increased sensitivity (Full Well capacity per pixel: 12,000 electrons, but 36,000 with 2 x 2 binning=Ultra-High sensitivity).
- CCD grade 0 (best quality chip).
- Gain: 2 software settings.
- Readout noise: 12 electrons.
- Signal to noise ration 62B.
- Digital temperature compensation.
- C-mount Lens Interface.
- As the PCI Digital Controller also powers the CCD, no need for external power source.
- Shielded ethernet patch cable.
Optics
- 105mm Nikkor Micro-lens and Special Slide Adapter.
- Bandpass Filters Slide: BP415, BP515, BP550, LP550, BP600, White.
Copy-Stand with column and 18x20" baseboard, and CCD camera arm.
REQUIRES CS-16 (preferred) or MCS-400 Forensic Light Source or HandScope and / or SCENESCOPE.
