Ultrasonic Cleaner - HORIBA

Ultrasonic Cleaner for
Industrial Water Quality Sensors

Burst oscillation method and sweep function


  • High cleaning effect reduces the maintenance load by about 90%
  • Sweeping of the oscillation frequency enables extensive cleaning and prevents uneven cleaning *refer to figure 1

 

Continuous cleaning while in operation


  • Continuous is possible without affecting measured values

 

Applicable instruments and examples of cleaning effects


*Please inquire for more details.

figure 1

Cleaning effect video

Video Player is loading.
Current Time 0:00
Duration 0:00
Loaded: 0%
Stream Type LIVE
Remaining Time 0:00
 
1x
    • Chapters
    • descriptions off, selected
    • subtitles off, selected

        Examples

        Field data (6 months)

        Measurement with optical dissolved oxygen meter

        By using the ultrasonic cleaner, it was confirmed that no influence on the measured value by fouling was observed even though without maintenance for 6 months.

        Cleaning comparison table

        Type of sampleUltrasonic
        SlimeFood, Paper, Pulp
        MicroorganismAlgae, Bacteria (activated sludge)
        OilTar, Heavy oil×
        Light oil
        Fatty acid, Amine×
        SuspensionSoil and sand
        Metal powder
        Clay, Calcareous
        ScaleCohesive sediment, Neutralizer
        scrollable

        Specification

        Product nameUltrasonic oscillator integrated typeUltrasonic oscillator separate installation type
        Immersion
        (insertion type)
        Immersion
        (drop-in type)
        Flow typeImmersion
        (insertion type)
        Immersion
        (drop-in type)
        Flow type
        Measurement
        parameters
        pHUCH-101/
        UCH-201
        UCF-301UCH-111/
        UCH-211
        UH-111AUCF-311
        ORPUCH-101/
        UCH-201
        UCF-301UCH-111/
        UCH-211
        UH-111AUCF-311
        F-
        (Fluoride ion)
        UCH-101UCF-301UCH-111UCF-311
        MLSSUDH-101UDH-111UH-111A
        LDO
        (Optical dissolved oxygen)
        UDH-151UDH-161UH-15
        NH4-N
        (Ammonia nitrogen)
        UH-16A
        PowerAC100~240 V 50/60 Hz
        Power consumption10 VA
        Cleaning methodUltrasonic continuous irradiation method
        Control methodBurst method with oscillation time control
        Oscillation frequencyFor pH/ORP/F- : Approx. 70 kHz, for LDO/MLSS/NH4-N : Approx.68~72 kHz sweep
        Ambient operating temperature-5~50℃ : UCH-101・UCH-111・Flow-through
        5~50℃ : UDH-101・UDH-111
        0~50℃ : UDH-151・UDH-161
        Ambient operating humidityRelative humidity 5~90% (no condensation)
        Measurement solution temperature-5~50℃ (no condensation) : UH-15・UDH-151・UDH161・UH-16A
        -5~80℃ (no condensation) : Flow-through・UCH-101・UCH-111
        0~50℃ (no condensation) : UH-111A
        Measurement solution flow rateImmersion (Insertion type) : 2 m/s or less
        Measurement solution pressureFlow-through -5~40℃ : 0.30 MPA
                 60℃ : 0.22 MPa
                 80℃ : 0.15 MPa
        Immersion type : Atmospheric pressure (For F- including flow type : atmospheric pressure only)
        Liquid junction materialSUS316 PP FKM (exclude detector and sensor)
        Oscillator caseIP Protection Rating : IP54 (IEC60529, JIS C0920) (Category 2)
        NotesMeasurement solution conditions are for ultrasonic cleaner only. Please check the specified temperature and pressure conditions of each product since the operating temperature range, pressure, flow rate conditions, etc.
        differ depending on the combination of electrode, sensor, and holder. In addition, this product does not include a detector and sensor. The oscillator separate installation type comes with an ultrasonic oscillator and a dedicated cable.
        scrollable
        Corporate