DeltaDiode™ General Specifications
DeltaDiode Type | Pulse Duration | Repetition Rate | Available Wavelengths |
---|---|---|---|
DeltaDiode Laser (Denoted with an “L” on part number) | 35 to 200 ps | 10 kHz to 100 MHz | 375 to 1,310 nm |
DeltaDiode LED (No “L” on part number) | 750 to 950 ps | 10 kHz to 25 MHz | 265 to 455 nm |
DeltaDiode Controller Specifications
DD-C1 Controller
Function | Specification |
---|---|
Repetition Rates | 10 kHz, 20 kHz, 50 kHz, 100 kHz, 250 kHz, 500 kHz, 1 MHz, 2 MHz, 4 MHz, 5 MHz, 8 MHz, 10 MHz, 16 MHz, 20 MHz, 25 MHz, 50 MHz, 80 MHz, 100 MHz, or Trigger Input (single-shot to 50 MHz). Subject to attached head |
Trigger Input | Pulse amplitude +0.5 V to +5 V, trigger threshold software programmable from +0.2 V to +2 V, 50 Ω, 20 ns minimum spacing |
Sync Outputs | Simultaneous output of NIM-compatible (-0.8 Vpp 50 Ω) and TTL-compatible (+2 Vpp 50 Ω), automatic width selection 4-15 ns nominal |
Sync Delay Control | Adjustment of sync output pulse timing in range -10 ns to +10 ns nominal in 1 ns steps, uncalibrated |
Fast Gate Input | Pulse amplitude +0.5 V to +5 V, trigger threshold software programmable from +0.2 V to +2 V, 50 Ω. Selectable Inhibit/Enable modes |
Slow Gate Input | Pulse amplitude +2 V to +5 V. 10 kΩ. Selectable Inhibit/enable modes. Operates in Pulsed and CW modes |
Interlock | 2-pin connector (included). Contacts must be short-circuited to enable emission |
Connection to Head | 1.5 m cable (included) |
User Interface | LCD display (stand-alone operation) or software (PC control) |
PC interface | USB 2.0 with integral hub for downstream connection to other USB peripherals (cable to host PC and software supplied) |
Power Requirement | 90 V to 250 V AC, 50/60 Hz, 100 VA |
Operating Temperature | +15˚ C to +30˚ C (ambient) |
Weight & Dimensions | 3.1 kg, 234 x 255 x 92 mm |
Solas MOFA Fiber Laser Specifications
Parameter | Solas 355L | Solas 532L | Solas 1064L |
---|---|---|---|
Power | > 7 mW at 80 MHz | > 30 mW at 80 MHz | > 300 mW at 80 MHz |
Power Stability | 0.5% RMS over 10 min | ||
Pulse duration | 80 to 100 ps (FWHM) | ||
Spectral Width | < 0.2 nm | < 0.4 nm | |
Resolution Rate | Pulse on demand to 100 MHz | ||
Pointing Stability | < 1 μrad | ||
Polarization Extinction Ratio | > 20 dB | ||
Beam Quality | Multi-mode fiber output | Circular TEM00 beam |
SpectraLED Specifications
Pulse Duration | Repetition Rate | Available Wavelengths | |
---|---|---|---|
SpectraLED | < 250 ns to > 10 s | 0.1 to 100 kHz | 265 to 1,275 nm |
SpectraXE Specifications
Pulse Duration | Repetition Rate | Available Wavelengths | |
---|---|---|---|
SpectraXE | 0.4 μs | 0.1 Hz to 80 Hz | 185 to 2,000 nm |
HPPD Specifications
Model | Wavelength Range | Temporal Response (IRF FWHM) | Dark Count | Quantum Efficiency |
---|---|---|---|---|
HPPD-650 | 220 to 650 nm | 50 ps | < 100 cps | 28% (340 nm) |
HPPD-720 | 300 to 720 nm | 120 ps | < 1000 cps | 47% (530 nm) |
HPPD-860 | 220 to 860 nm | 50 ps | < 200 cps | 23% (280 nm) |
HPPD-870 | 300 to 870 nm | 130 ps | < 500 cps | 26% (630 nm) |
HPPD-890 | 380 to 890 nm | 160 ps | < 1000 cps | 16% (630 nm) |
MCP-PMT Detectors
HPPD-860 COOLED | MCP-PMT (R3809-50) | |
---|---|---|
Typical IRF FWHM at 400 nm | 40-45 ps | 40-45 ps |
Shortest Measurable Lifetime | 40-45 ps | 5 ps |
Wavelength Response | 220-860 nm | 160-850 nm |
Robust for Steady State Spectra | Yes | No |
Amplifier + CFD | Integrated (no cable) | External |
High Voltage Bias | Integrated (no cable) | External |
Compatible with Phos and Steady State | Yes | No (requires second detector) |
Temperature Control | Integrated TEC (air-cooled) | External (water-cooled) |
Dark Count Rate (Cooled) | < 200 cps | < 20 cps |
PC Interface | N/A | N/A |
NIR TCSPC Specifications
Model | Sensor | Wavelength Range | Temporal Response | Dark Count | Cooling |
---|---|---|---|---|---|
NIR-R4 | R5509-43 PMT | 300 to 1,400 nm | 1.5 ns (TTS) | < 25,000 cps | Liquid nitrogen |
NIR-R7 | R5509-73 PMT | 300 to 1,700 nm | 1.5 ns (TTS) | < 250,000 cps | Liquid nitrogen |
NIR-H2 | H10330-25 PMT | 950 to 1,200 nm | 400 ps (TTS) | < 2,500 cps | Thermo-electric |
NIR-H4 | H10330-45 PMT | 950 to 1,400 nm | 400 ps (TTS) | < 25,000 cps | Thermo-electric |
NIR-H7 | H10330-75 PMT | 950 to 1,700 nm | 400 ps (TTS) | < 250,000 cps | Thermo-electric |
NIR-S1 | Count-100N SPAD | 400 to 1,000 nm | < 3 ns (TTS) | 100 cps | None |
FiPho TCSPC Electronics Specifications
Specifications | FiPho | FiPho-HR |
---|---|---|
Full Detectable TCSPC Lifetime Range | <20 ps to 30 sec | 5 ps to 30 sec |
TCSPC Converter Type | Digital TDC | Digital TDC and Analog TAC |
TCSPC Bin Width | <15 ps | ~ 250 fs |
Phosphorescence Mode | MCS | MCS |
Independent Stop Channels | 1 to 4 | 1 to 4 |
Photon Streaming | Included | Included |
FLIM Capable | Yes | Yes |
Detailed FiPho Electronics Specifications
Specifications | FiPho (TDC, MCS) | FiPho-HR (TDC, TAC, MCS) |
---|---|---|
Full Detectable Lifetime Range | <20 ps to 30 sec | 5 ps to 30 sec |
TCSPC Time Range | <2 ns to 55 μs | <2 ns to 55 μs |
Deadtime | 5 ns | 5 ns |
TCSPC Bin Width | <15 ps | ~ 250 fs |
Electronics Jitter (FWHM) | 30 ps | < 10 ps |
TCSPC Histogram Size | Up to 16k | Up to 64k |
Histogram Bin Depth | 32 bit | 32 bit |
Independent Stops | 1 to 4 | 1 to 4 |
Maximum Start Rate | 100 MHz | 100 MHz |
Maximum Stop Rate | 40 Mcps | 40 Mcps |
Operating Mode | Automatic Forward Timing | Automatic Forward or Reverse timing |
Streaming Mode | Photon Streaming (Time-Tag) | Photon Streaming (Time-Tag) |
MCS Bin Width | 5 ns | 5 ns |
MCS Time Range | < 2.5 μs to 330 seconds | < 2.5 μs to 330 seconds |
Maximum MCS Histogram Size | 64k | 64k |
Acquisition and Analysis Macro Scripting | Yes | Yes |
PC Interface | USB 3.0 | USB 3.0 |
Software | EzTime, EzTime Image | EzTime, EzTime Image |
HORIBA Scientific has a policy of continuous product development, and reserves the right to amend part numbers, descriptions and specifications without prior notice.