OCMA-550

Oil content analyzer

Automatic measurement with a single switch.

One-touch operation with a single button press allows for ease of use by anybody. Can be used for a wide range of applications such as wastewater monitoring and component quality control.

Segment: Process And Environmental

Division: Water Pollution

Manufacturing Company: HORIBA Advanced Techno Co., Ltd.

Quick and easy measurement in approximately 3 minutes^*1
Measurements can be made easily and quickly by simply pressing the start button. Compared to the n-hexane method, measurement times can be significantly reduced.
*Excluding time for activities such as warming, calibration, rinsing

Capable of measuring low-boiling point oil components
The n-hexane method requires the evaporation of the oil extraction solvent, which leads to volatilization of low boiling point oils (such as gasoline). The OCMA-500 series eliminates the need for an evaporation process, allowing for the prevention of volatilization in low-boiling point oil components.

Oil content can be displayed as a concentration (value)
Unlike the n-hexane method, which calculates concentration by measuring the weight of oil content, OCMA-550 can directly display oil concentration.
*Please contact us for inquiries regarding the types of oil that can be detected.

Environmental-friendly, safe, and cost-effective oil extraction solvents are in use
The domestic model OCMA-505-H/555-H uses solvent H-519 for oil extraction, while the international model OCMA-500/550 uses solvent S-316. Both H-519 and S-316 are not regulated under the Montreal Protocol (Ozone Layer Protection Act) and the PRTR system (Act on the Evaluation of Chemical Substances and Regulation of Their Manufacture, etc. (CSCL)). Furthermore, compared to the traditional solvent H-997, solvent H-519 has achieved similar regeneration efficiency to solvent S-316, allowing for a reduction in running costs.

Model	OCMA-550
Product name	Oil content analyzer
Measurement method	Solvent extraction - non-dispersive infrared absorption analysis method
Measured objects	Substances extracted from sample water into solvent and having infrared absorption near a wavelength from 3.4 μm to 3.5 μm
Measurement range	0 mg/L to 200 mg/L
Resolution	For mg/L 0 to 99.9: 0.1, 100 to 200: 1 For mg/g, mg/kg, mg/PC 0 to 9.99: 0.01, 10.0 to 99.9: 0.1, 100 to 200: 1 Abs.: 0 to 1.000 Abs.: 0.001 Abs.
Repeatability	0 mg/L to 9.9 mg/L: ±0.4 mg/L ±1 dig. 10.0 mg/L to 99.9 mg/L: ±2.0 mg/L ±1 dig. 100 mg/L to 200 mg/L: ±4 mg/L ±1 dig. * For standard liquids
Display method	3.5 inches, 320×240 dots Backlight Color graphic LCD
Calibration method	Select each optionally zero calibration and span calibration
Extraction solvent	S-316
Amount of extraction solvent required	Approx. 6.5 mL
Extraction method	Using the extraction solvent, and extracted manually outside the product
Ambient operating temperature	0°C to 40°C (no condensation)
Power supply	100 V to 240 V AC ±10%, 50/60 Hz
Power consumption	100 V to 240 V AC, Approx. 60 VA
External dimensions	195 (H) × 253 (W) × 293 (D) mm
Mass	Approx. 5 kg
External output	Output to a USB memory stick
Functions	300-item data memory (measurement history) Stabilized measurement value display Self error determination Clock Conversion of measurement units Compliant with ASTM D7066-4